| Customization: | Available |
|---|---|
| After-sales Service: | on-Site Installation, Commissioning, Technical Sup |
| Warranty: | 3 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Extruder Model |
RFS-Z92/188 |
RFS-Z110/220 |
RFS-Z92/188& RFS-Z80/156 For coex |
|
Capacity (kg/24h) |
14000-18000 |
25000-28000 |
17000-20000 |
-- Patent design, over 10 years' extrusion and lamination production experience.
-- Energy saving, high efficient and stable.
-- Easy replacement of embossing roller.
-- Easy operation and maintenance and QC checking.
-- Better plasticization and more peel strength, because of our patent lamination system.
-- No waste during change overlay and decor film.
-- Good performance on shrinkage and bending after extrusion.
-- Make sure good performance and be even on embossing depth.
-- Make special design for SPC flooring production and offer turn-key project.
|
1 |
Conical Twin Screw Extruder (110/220) |
|
|
Screw |
||
|
Type |
Conical Twin Screws |
|
|
Diameter (Front/Back) |
110/220mm |
|
|
Material |
38CrMoAlA with Bimetallic Alloy |
|
|
Treatment |
Nitride |
|
|
Thickness of nitride layer |
0.6-0.7mm |
|
|
Hardness |
HV 740 - 940 |
|
|
Roughness |
Ra≤0.8um |
|
|
Rotation speed(r/min) |
1~34.7 r/min |
|
|
Barrel |
||
|
Barrel material |
38CrMoAl with SKD Alloy Sleeve |
|
|
Treatment |
Nitride with Hardness 900-1000HV |
|
|
Heating zone |
Six zones |
|
|
Heating on Feed inlet (1st zone) |
Ceramic heater |
|
|
Heater (2nd to 6th zone) |
Aluminum heater |
|
|
Heating power(kW) |
80KW |
|
|
Temperature range(ºC) |
50~300 |
|
|
Cooling zone |
Five zones |
|
|
Cooling |
Air blower with Water circulation |
|
|
Drive |
||
|
Motor |
AC motor (Siemens Beide/WNM) |
|
|
Motor Power |
200KW |
|
|
Speed driver |
Frequency inverter (TECO/ABB) |
|
|
Gearbox |
Horizontal |
|
|
Gears material in Gearbox |
20CrMoTi Alloy steel |
|
|
Connection (motor & gearbox) |
Motor connected with gearbox in the behind |
|
|
Vacuum venting |
||
|
Vacuum pump |
Liquid ring vacuum pump |
|
|
Power |
7.5KW |
|
|
Vacuum degree |
0~-0.09Mpa |
|
|
Dust collection tank |
Two pcs |
|
|
Feeding |
||
|
Hopper for loading material |
SUS304 stainless steel with sight glass |
|
|
Feeding |
By screw rotating |
|
|
Feeding screws |
Double screws |
|
|
Drive |
2.2KW gearmotor |
|
|
Speed driver |
Frequency inverter (ABB brand) |
|
|
Blender unit |
Avoid powder bridging |
|
|
Control |
||
|
Control cabinet |
Integrated in the extruder |
|
|
Control cabinet cooling system |
Air Blow cooling for power cabinet |
|
|
Control |
All motors and temperature control circuits (total 16 zones) and melt pressure and alarms in extruder |
|
|
Temperature Control type |
Temperature control meters |
|
|
Manu display in language |
English / Chinese |
|
|
Operation |
Touch and button |
|
|
Overload alarm |
Included |
|
|
General parameter |
||
|
Extruder Max. capacity |
1500kg/h |
|
|
Production capacity (recommend) |
1000-1250kg/h |
|
|
4 mm product |
3000-3500 m²/day |
|
|
Total installation power |
300KW |
|
|
Weight |
11500Kg |
|
|
Length |
8000mm |
|
|
Width |
1800mm |
|
|
Height (included loader) |
4800mm |
|
|
Extrusion centerline height |
1000mm |
|
|
2 |
T-Die |
|
|
Outlet width |
1050mmm (to be confirmed when place order) |
|
|
Outlet gap for thickness |
3-6mm |
|
|
Max width of product |
980-1000mm |
|
|
Thickness range for product |
3-6mm |
|
|
Structure |
Coat hanger type |
|
|
Material |
5CrNiMo mould alloy steel |
|
|
Die lip flow surface roughness |
0.015-0.02 um |
|
|
Chrome plate in the flow channel |
0.04-0.06 mm |
|
|
Heating |
Electrical heater |
|
|
Heating zone |
7 zones |
|
|
Fasten |
By bolts |
|
|
Total installation power |
36KW |
|
|
Weight |
1000Kg |
|
|
3 |
Support Frame for T-die |
|
|
Material |
Steel frame with painting |
|
|
Moving |
On rail |
|
|
Centerline height |
1000mm |
|
|
Height adjustment range |
50mm |
|
|
Weight |
100Kg |
|
|
4 |
Four Roller/Five Roller Calender with lamination |
|
|
Roll quantity |
Four rollers / Five Rollers |
|
|
Structure |
L type with rollers horizontal layout |
|
|
Body of Frame |
Square Steel frame |
|
|
Roller diameter |
400mm |
|
|
Roller length |
1500mm |
|
|
Roller raw material |
Seamless steel tube |
|
|
Treatment on roller |
Quench and surface chrome plate |
|
|
Hardness on roller surface |
>HRC50 |
|
|
Chrome plate thickness |
0.08-0.12mm |
|
|
First 1 and 2 rollers |
Mirror roller |
|
|
Mirror roller surface |
Ra<0.025um |
|
|
3rd roller for sheet bottom surface |
Embossed as Seller standard |
|
|
4th roller for sheet top surface |
Pattern as buyer ordered |
|
|
Surface embossing depth monitor |
Included |
|
|
Roller rotating driven |
Gear motor |
|
|
Motor |
1.5KW x 4 sets/ 5 sets |
|
|
Motor quantity |
4 sets /5 sets independent drive on each roller |
|
|
Rotating speed control |
Frequency inverter from ABB |
|
|
Linear Speed |
0-6m/min |
|
|
Speed synchronization on all rollers |
Included |
|
|
Distance between rollers |
0-50mm |
|
|
Distance adjustment |
By motor or manual |
|
|
Roller move driven |
0.37KW x 2 sets for 1st and 4th roller/ 5th Roller |
|
|
Bearing |
For high temp. resistance |
|
|
Rotating connectors |
8 pcs of 1.25'' inch |
|
|
Calender moving |
On guide rail |
|
|
Movement motor |
1.5KW AC motor |
|
|
Control |
Meter control |
|
|
Total installation power |
10KW |
|
|
Weight |
9500Kg |
|
|
5 |
Lamination device |
|
|
Platform height |
2400mm |
|
|
Unwinder shaft |
Four pcs |
|
|
Air Shaft diameter |
76mm |
|
|
Shaft length |
1500mm |
|
|
Tension control |
Magnetic powder brake |
|
|
Film feeding device |
Two sets |
|
|
Haul off for film |
Steel roller and rubber roller |
|
|
Feeding device driven |
0.55Kw |
|
|
Deviation rectification control |
Included |
|
|
Unwinder Movement |
on linear guideway |
|
|
Lamination press roller |
Two sets of 120mm Silicon rubber rollers |
|
|
Total installation power |
10 KW |
|
|
Weight |
1200 Kg |
|
|
6 |
Roller temperature controller |
|
|
Controller quantity |
Each set for each roller |
|
|
Conduct media |
Conduct oil |
|
|
Cooling media |
Soft water (from factory water circulation) |
|
|
Temp control range |
40-200ºC |
|
|
Temp control tolerance |
+1ºC |
|
|
Oil pump power |
2.2KW x 3 sets |
|
|
Heating power |
15KW x 3 sets |
|
|
Total installation power |
50KW |
|
|
Weight |
500Kg |
|
|
7 |
Cooling bracket |
|
|
Length |
16m |
|
|
Width |
1500mm |
|
|
Roller |
Stainless steel roller |
|
|
Air curtain blower for cooling |
4 sets + 2 sets Air Blower |
|
|
Total installation power |
1.5KW |
|
|
Weight |
700 Kg |
|
|
8 |
Trimming blade |
|
|
Blade quantity |
Two pieces |
|
|
Trimming width on product |
As per T-die width |
|
|
Weight |
20 kg |
|
|
9 |
Haul off |
|
|
Type |
Rollers pulling |
|
|
Rollers quantity |
one couples |
|
|
Roller size |
1500mm |
|
|
Roller diameter |
250mm |
|
|
Roller |
Rubber roller |
|
|
Clamp |
Pneumatic cylinder |
|
|
Drive |
3KW gear-motor |
|
|
Transmission |
Gears drive |
|
|
Speed control |
Frequency inverter (ABB brand) |
|
|
Speed range |
0-4m/min |
|
|
Total installation power |
3 6W |
|
|
Weight |
1000 Kg |
|
|
10 |
Shear cutter |
|
|
Cutting |
Guillotine cutting |
|
|
Cutting Max width |
1300mm |
|
|
Cutting Max thickness |
1-6mm |
|
|
Cutting motor |
Brake motor |
|
|
Total installation power |
5.5KW |
|
|
Weight |
800 Kg |
|
|
11 |
Auto Stacker |
|
|
Length counting |
Position sensor |
|
|
Suction cup |
8 pcs |
|
|
Lifting weight |
Up to 50kg |
|
|
Size of estimated product |
1000mm x 1800mm |
|
|
Moving drive |
Servo motor |
|
|
Control and parameter input |
PLC |
|
|
Installation power |
4KW |
|
|
Weight |
550kg |
|
|
Components brand list |
||
|
A. |
Main Motor of Mixer and Extruder |
Siemens standard /WNM |
|
B. |
Frequency inverter of extrusion line |
ABB/TECO |
|
C. |
Temperature meter |
RKC/Omron/FIJI |
|
D. |
Electrical components |
Siemens / CHINT / DELIXI |
|
E. |
Gearmotor |
REDSUN |
|
F. |
T-die |
Top brand |
ROMEROCA CERTIFICATES AND PATENT
Romeroca is a professional flooring innovation and technical sevice company,
with 16 years experience in flooring industry, and over 10 years in Asian market.
We provide one-stop supply and services for overseas flooring factories,
including flooring production line, flooring raw materials, and technical services.
SPC flooring Extruder machine, Mixer, Crushing & Mill machine, UV coating machine, Click slotting machine,Cutting machine, V-groove painting machine, IXPE/EVA lamination machine, Packing machine.
Chemicals: PVC SG5, stabilizer, ACR , CPE , PVC lubricant, PE wax.
Wear- resisting layer , PVC decor Film , IXPE/EVA underlayment, UV paint.
Romeroca already supplied 20 million meters of PVC decor film to global market.
To save shipping cost for our partners, Romeroca can mix different raw materials to ship together.
PCD cutters, PCD saw blades, Extruder mould, surface rollers, Screw & barrel, UV rollers, UV lamps.Romeroca can supply all kinds of accessories for all machines of rigid core vinyl flooring production.
Romeroca can supply all kinds of test equipments that SPC flooring manufacturing factory needs. For example: Drying Oven, Tensile tester, Wear tester, Scratch Tester, Click Strengthen tester, Click Projector, and so on.
1) 12-months warranty on all Romeroca machine (excluding wear parts).
2) 36-months tracking service, prompt response within 24 hours.
3) Providing factory production process and machine layout design.
4) Providing technical guidance, training and support.
5) Providing timely supply support for spare parts.
6) Other support from raw materials, machines to finished products.
){kind=link}